Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater

Product Categories

Xinxiang jinrui machinery factory

Contact Now

Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater

Name: Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater
Brand: JINRUI
Price: 1 USD

Best Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater wholesale

Brand Name : JINRUI

Model Number : 108mm

Certification : ISO/CE

Place of Origin : CHINA

MOQ : 20 SET

Price : negotiate

Payment Terms : L/C, T/T

Supply Ability : 30 set per month

Delivery Time : 10-15 working days

Packaging Details : seaworthy packing

Diamater : 108mm

Usuage : 1000mm width belt conveyor

Product name : Buffer Roller

Material : Rubber and Carbon Steel

Condition : New

Structure : Trough model

Contact Now

Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater

Belt width(mm)	Roller		Bearing NO.
800	D	L	Bearing NO.
1000	89	315	204,205
1200	108	380	204,205,305
1400	133	465	205,305,206,306
1600	133	530	205,305,206,306
1800	159	600	205,306,307,308,309
2000	159	670	207,309,308
2200	194	800	207,307,308,309
2400	194	900	206,307,308,309

1. Advantages and Features

The buffer roller is used for the belt conveyor to reduce the impact of the falling material on the conveyor belt. It is mainly developed for the corrosive environment of coal washing plants, coking plants, and chemical plants. Its inherent toughness is ordinary It is more than 10 times that of metal, and has a life span of five times that of traditional pillar shoes. It is corrosion-resistant, flame-retardant, anti-static, and light in weight. It is widely used in mining. The special polymer material for the roller body has mechanical properties similar to bronze, has good wear resistance, and has good self-lubricating properties, and does not damage the belt. The buffer roller has superior anti-corrosion performance. The roller body and the seal are made of polymer materials, which are corrosion resistant. Used in corrosive occasions, the service life can reach more than 5 times that of ordinary rollers.

2. Main function and scope of application

The buffer roller is light in weight and has low rotational inertia. The special polymer material for rollers is light in weight, and its specific gravity is one-seventh of steel. The weight of rollers made of this material is about one-half of ordinary rollers, with low rotational inertia, between the rollers and the belt. The friction is small. The buffer roller is installed below the receiving section of the conveyor to reduce the impact of the material on the conveyor belt during material blanking, so as to extend the service life of the conveyor belt. The spacing of the buffer rollers is generally 100-600 mm.

3. More attention:

3.1. During the installation, pay attention to the assembly dimensions of all parts of the fuselage and keep the straightness of the whole machine.

3.2. Tighten bolts when installing bolt fasteners.

3.3. The center line of the belt at both ends shall be aligned when making the belt joint to prevent the belt from running off.

3.4 When installing the protection part of the electric appliance, be careful to prevent damage.

Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater

4. Packing Details:

4.1, Outer packing is plywood case, which is up to the international standards.

4.2, Inner packing is Moisture-proof and water-proof membrane.

4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.

5. Maintenance and repair

5.1 under normal conditions, the conveyor is required to start without load and avoid short-time starting.

5.2 it is necessary to check whether there is oil leakage in the reducer regularly, and whether the regular oil filling volume is in conformity with the construction in time

Correct and supplement.

5.3 if there is squeal at the driving drum, it means that the belt is slipping. Check whether the belt is tensioned.

5.4 the belt joint shall be inspected frequently, and the damaged parts shall be cut and redone in time, and the damaged parts shall be protected during redoing

Product Tags:

adjustable height conveyor

mobile conveyor belt

Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Xinxiang jinrui machinery factory
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!